The EU Paperwork Athens Buyers Ask for Before Bathroom Tiles Ship
Greece applies EU construction-products rules, which have been in transition since January 2026. For ceramic and porcelain tiles, that means CE marking against EN 14411 and a manufacturer's Declaration of Performance (DoP). The European Commission's list of harmonised standards is the reference for which EN 14411 edition supports CE marking, so ask each supplier which edition their DoP references. Marks used in other export markets, such as India's BIS or Saudi Arabia's SASO, do not replace CE marking for Greece.
For a bathroom order, the DoP matters because it states declared performance such as water absorption. Under EN 14411 and ISO 13006, porcelain tiles fall in the low-absorption group at ≤0.5% water absorption (tested to EN ISO 10545-3), while ceramic tiles in the 3–10% range are generally used on walls rather than wet floor areas. A sensible Athens split is porcelain for bathroom floors and shower floors, with ceramic or porcelain on walls depending on the project specification.
Bathroom zone guide for Athens projects
| Bathroom zone |
Tile body |
Formats commonly traded |
Finish direction |
Check before ordering |
| Bathroom walls |
Ceramic (3–10% absorption) or porcelain, per project specification |
30×60 cm; large slabs in hospitality and high-end projects |
Satin and lappato gaining traction on luxury wall cladding |
Declared water absorption in the DoP |
| Main bathroom floor |
Porcelain (≤0.5% absorption) |
60×60 cm and 60×120 cm |
Matt tends to be preferred |
DoP value and the project's slip requirement |
| Shower floor |
Porcelain (≤0.5% absorption) |
Smaller formats follow the shower-floor slope more easily |
Anti-slip class as set in the project specification |
Project specification; an R-rating alone does not establish barefoot suitability |
Before you confirm an order, ask the supplier for the CE marking details, the DoP for each product line and test reports that match the exact size and finish you are buying. Conformity requirements can change, so confirm the current position with your customs broker or the relevant authority before booking.
Anti-Dumping and Landed Cost: Why an FOB Mundra Price Is Only the Start
In February 2023 the European Commission imposed definitive anti-dumping duties on ceramic tiles from India under Commission Implementing Regulation (EU) 2023/265. The measure applies to imports into every EU member state, including Greece. Rates are set per exporting producer, so two Indian suppliers quoting the same FOB price can end up with different landed costs in Athens. Ask every supplier for the anti-dumping rate that applies to the exporting producer, and confirm it and the base customs duty with your customs broker before you compare quotes.
CIF to Piraeus is the term European importers most often ask for. Whichever term you use, build the comparison from these estimated cost components rather than treating any single quote as a total landed cost:
What an FOB Mundra and a CIF Piraeus quote usually cover
| Cost component |
FOB Mundra quote |
CIF Piraeus quote |
Who confirms it |
| Tile price per sqm or per box, by size and finish |
Included |
Included |
Supplier |
| Export clearance and loading at Mundra |
Included |
Included |
Supplier |
| Ocean freight to Piraeus |
Not included |
Included |
Supplier or your forwarder |
| Marine insurance to Piraeus |
Not included |
Included |
Supplier or your forwarder |
| Port handling and clearance charges at Piraeus |
Not included |
Usually not included; check the quote |
Customs broker |
| Customs duty plus the producer-specific anti-dumping duty |
Not included |
Not included |
Customs broker |
| VAT payable on import |
Not included |
Not included |
Customs broker |
| Inland haulage from Piraeus to your Athens warehouse or site |
Not included |
Not included |
Forwarder |
Quote bathroom wall and floor lines separately, because different sizes and finishes can carry different prices and box weights.
Indian bathroom tiles are generally positioned in the mid-tier and commercial segment in Athens, while Spanish and Italian tiles sit at the premium end. That positioning only holds up if duty and freight are counted from the first quote.
Sizes and Finishes Athens Bathroom Projects Commonly Specify
Athens trades tiles, called πλακάκια (plakákia) locally, in metric sizes, and quotes and contracts are priced per square metre. For bathrooms, the sizes commonly traded are:
- 30×60 cm: high-volume wall format
- 60×60 cm: a regular choice for residential bathroom renovations
- 60×120 cm: widely used for floors
- 80×160 cm: appears to be gaining ground in premium projects
- 120×240 cm and 120×280 cm slabs: often specified for hospitality and high-end commercial projects
Large formats can require more cutting and careful slope planning around shower drains. On shower floors, a smaller floor tile can follow the shower-floor slope more easily.
Matt finishes tend to be preferred on floors. Satin and lappato surfaces are gaining traction on luxury wall cladding. In hotel projects, anti-slip finishes in the R10–R11 range are frequently specified for wet areas such as balconies and pool surrounds. Treat these as project or developer specifications, not as a blanket legal requirement. The R-rating (DIN 51130) is the slip-resistance reference most often used in Greece, but an R-rating alone does not establish suitability for barefoot wet areas. Check the project specification for shower floors, especially in hotels and in bathrooms used by children or older guests.

Stone Looks and Warm Neutrals: Planning One Mixed Wall-and-Floor Container
Athens bathroom design often draws on stone. Travertine and limestone looks are popular, as are marble looks with warm umber veining and concrete-effect surfaces for more contemporary interiors. The dominant tones are beige and sand, warm grey and ivory.
For a mixed container, one stone-look design in two or three neutral tones, ordered in a wall format such as 30×60 cm and a floor format such as 60×60 cm or 60×120 cm, lets a distributor supply matching bathroom wall and floor packages from a single shipment. Grout shade and cleaning routines can make residue or colour variation more visible on pale stone looks, so suggest matching grout colours and a mild tile-compatible cleaner to contractors.

Mundra to Piraeus: Transit Times, Container Weight and Pallet Rules
The Port of Piraeus (GRPIR), about 12 km south of central Athens, is Greece's largest seaport and the main container entry point for tiles bound for the city. Indicative ocean timings from India are:
- Mundra to Piraeus, direct sailing: roughly 11–17 days, usually via the Suez Canal
- Transhipment via a Mediterranean hub: roughly 24–32 days in total
These are typical ranges, not fixed schedules, and routings can change.
A standard 20ft container has a maximum gross weight of around 24,000 kg, which leaves an indicative cargo payload of about 21,600–21,700 kg. Tiles are dense, so a bathroom tile container usually reaches its weight limit before it runs out of space. When wall and floor boxes share one container, confirm the box weights and the pallet plan with the supplier before you fix quantities, and check road haulage weight limits with your forwarder.
Wooden pallets and dunnage from outside the EU must comply with ISPM-15: heat-treated or fumigated, and carrying the official IPPC stamp. Non-compliant packaging can be rejected at the port, which means treatment or destruction at the importer's cost.
Athens renovation work tends to peak from March to June, ahead of the tourist season, and again from September to November. It often slows in July and August because of the heat. For hotel bathroom refurbishments timed before the tourist season, planning tile arrivals ahead of the spring window helps contractors start on schedule.
Pre-shipment checklist for a Piraeus-bound bathroom tile container
| Item |
What to ask for |
Why it matters in Athens |
| Declaration of Performance |
A DoP for each product line, showing which EN 14411 edition it references |
CE marking depends on it |
| Test reports |
Reports that match the exact size and finish you are buying |
Confirms declared water absorption for floors and showers |
| Anti-dumping rate |
The rate for the exporting producer named on your invoice |
Rates differ by producer and change the landed cost |
| Pallets |
ISPM-15 heat-treated or fumigated pallets carrying the IPPC stamp |
Non-compliant packaging can be rejected at Piraeus |
| Box weights and pallet plan |
Weights for each wall and floor line in the container |
A tile container reaches its weight limit before its volume limit |
| Quote terms |
Incoterm, named port, currency and price unit (sqm or box) |
Lets you compare quotes like for like |
| Arrival timing |
A dispatch date that lands before the March–June or September–November windows |
Contractors can start refurbishments on schedule |
Send your wall and floor sizes, finishes and target quantity to discuss sourcing options for a Piraeus-bound order.

Three Bathroom Tile Import Mistakes Athens Buyers Can Avoid
Ordering sizes the Athens market does not specify
A container of formats that local contractors and architects rarely use can sit in the warehouse. Check sizes against current project specifications, not just against what sells in other markets.
Using wall-grade ceramic on shower floors
Ceramic tiles in the 3–10% water absorption range are generally meant for walls. Specify low-absorption porcelain for bathroom and shower floors, and check the DoP for the declared value.
Accepting incomplete documents
A CE claim without a matching DoP and test reports for the exact product creates avoidable risk at clearance and later in the project.
Example Import Scenario for Bathroom Tiles in Athens
This is a hypothetical, illustrative scenario, not a real customer case.
An Athens fit-out contractor is refurbishing guest bathrooms in a small hotel ahead of the spring season. The specification calls for 30×60 cm wall tiles in a warm-ivory stone look and 60×120 cm matt porcelain floor tiles, with the anti-slip class set out in the project specification for the shower zones.
Before ordering, the contractor asks the supplier for the DoP and EN 14411 test reports for both products, the exporting producer's anti-dumping rate, a CIF Piraeus quote per sqm, the box weights, and confirmation of ISPM-15 pallets. With the documents checked by a customs broker, the contractor books a 20ft container to arrive before the March renovation window. The order is planned to the weight limit, not to the container's volume.
Final Takeaway
For most Athens bathroom projects, low-absorption porcelain on floors and showers, paired with stone-look 30×60 cm or 60×120 cm formats in warm neutrals, is a sensible specification. Because most shipments to Athens enter the EU through Piraeus, check documentation and the producer-specific anti-dumping rate before you book, and have your customs broker confirm the duty position. Then contact Morbi Tile Hub with your project specification and order quantity to discuss sourcing for your Athens bathrooms.
Disclaimer
When sourcing or enquiring about bathroom tiles for projects in ATHENS, Greece, pricing and landed costs can vary depending on supplier terms, order volume, chosen Incoterm, sea freight, port handling, clearance fees, and applicable duties and taxes.
Because import quotes often exclude destination charges, container payload limits, and inland haulage, buyers should compare like-for-like offers carefully and confirm transit schedules, seasonal renovation windows, and availability before committing.
Tile performance depends on material quality, proper installation, regular maintenance, and local conditions such as ATHENS's wet-area bathroom exposure and project-specific slip requirements.
Duty, tax, certification and customs requirements can change, so confirm the current position with your customs broker or the relevant authority before booking a shipment.
All specifications must be verified with suppliers or professionals before final decisions.
Images, designs, colours and finishes are for reference and may differ in actual supply due to lighting conditions, screen variations and batch differences, so consider reviewing physical samples before a bulk order.
Final selection should be based on verified specifications, a confirmed quote, and actual project conditions.