Floor Tiles for Indian Homes – 2026 Prices, Types & Expert Guide

GVT has a matte or satin glazed surface natural look, better traction, suitable for most floor applications including bathrooms. PGVT goes through an additional polishing step producing a mirror-like gloss finish best for living rooms and hotel lobbies where slip risk is low. For bathroom floors, always choose GVT in matte or anti-skid finish. High-gloss PGVT becomes hazardous when wet.

PEI 4 is the recommended minimum for Indian residential living rooms and kitchens. PEI 3 is acceptable for bedrooms and low-traffic areas. PEI 5 is used for retail, commercial, and high-footfall floors. Most quality GVT tiles from Morbi carry a PEI 4 rating always confirm this with the factory or distributor before ordering. [As per standard vitrified tile specifications]

No. Unlike natural marble, glazed tiles do not require periodic polishing or re-sealing. Routine mopping with water and a mild liquid floor cleaner is sufficient for residential use. The fired glaze layer maintains its finish without any surface treatment.

Large-format glazed vitrified tiles 600×1200 mm and above require a polymer-modified tile adhesive to achieve full-contact bonding. Standard sand-cement mortar does not provide adequate coverage for large tiles, which leads to hollow spots and eventual cracking.

Glazed tiles with a quality body and properly fired glaze layer last 25–30 years under normal residential use with routine cleaning maintenance.

Epoxy grout is the correct specification for wet areas bathrooms, kitchen dado, and shower zones. It resists staining, chemical exposure, and moisture penetration far better than standard cement-based grout. The tile face itself does not require sealing as the fired glaze provides a factory-sealed surface however, grout joints in shower areas should be sealed or specified with epoxy grout to prevent moisture penetration and discoloration over time.

Glazed tiles are ceramic or vitrified tiles coated with a protective layer of fused glass (glaze). This glaze gives the tile its colour, design, stain resistance, and easy-to-clean surface while improving durability and moisture resistance.

Yes. Glazed tiles are suitable for both floors and walls. Matte and sugar-finish glazed tiles are commonly used for flooring due to better grip, while glossy glazed tiles are popular for walls because they reflect light and enhance aesthetics.

It depends on the finish. Glossy glazed tiles can become slippery when wet, whereas matte, sugar-finish, and anti-slip glazed tiles provide better traction and are recommended for bathrooms, balconies, and other wet areas.

High-quality glazed tiles typically last 20–30 years or more when installed correctly and maintained properly. Their lifespan depends on tile quality, traffic level, installation, and regular maintenance.

Neither is universally better it depends on the application. Polished glazed tiles offer a luxurious reflective appearance for living rooms and commercial interiors, while unpolished or matte glazed tiles provide better slip resistance for kitchens, bathrooms, and outdoor covered spaces.

Polished glazed tiles have a smooth, reflective surface that enhances brightness and visual appeal. Unpolished glazed tiles feature a matte or textured finish that reduces glare, improves grip, and hides minor scratches and dust more effectively.

Glazed tiles are widely used for residential and commercial flooring, wall cladding, kitchens, bathrooms, living rooms, offices, retail spaces, hotels, and decorative feature walls due to their durability, low maintenance, and wide range of designs.

Yes. Glazed tiles are moisture-resistant, stain-resistant, and easy to clean, making them an excellent choice for kitchens and bathrooms. Matte or anti-slip finishes are recommended for wet floor areas.

Yes, but only certain types. Exterior applications require outdoor-rated glazed vitrified or porcelain tiles with low water absorption and anti-slip surfaces. Standard indoor glazed wall tiles are not recommended for outdoor flooring.

Clean glazed tiles using a microfiber mop, warm water, and a pH-neutral floor cleaner. Avoid abrasive pads, strong acids, bleach, or harsh chemicals that may damage grout or reduce the surface finish over time.

No. Unlike natural stone, glazed tiles cannot be mechanically polished after installation because the protective glaze is factory-applied. Regular cleaning is sufficient to maintain their appearance.

Premium glazed tiles are highly resistant to scratches, stains, and fading under normal residential and commercial use. Choosing the correct PEI rating and finish for the intended application further improves long-term performance.

Glazed tile prices generally start from around ₹28 per sq. ft. for basic options and can exceed ₹180 per sq. ft. for premium GVT and PGVT collections. Prices vary depending on size, finish, design, thickness, and order quantity.

Common glazed tile sizes include 300×300 mm, 300×600 mm, 600×600 mm, 600×1200 mm, 800×1600 mm, and large-format slabs. Availability depends on the tile collection and application.

Morbi Tile Hub offers a wide range of glazed tiles, including GVT, PGVT, glossy, matte, sugar-finish, carving, stone-look, marble-look, wood-look, and designer collections suitable for residential and commercial projects.

Consider the installation area, traffic level, finish, slip resistance, tile size, design preference, maintenance requirements, and budget. Matte finishes are generally preferred for floors, while glossy finishes are ideal for decorative wall applications.

Yes. Morbi Tile Hub supplies and ships glazed tiles across India through a reliable logistics network, offering factory-direct dispatch for residential, commercial, wholesale, and project orders.

Morbi Tile Hub provides factory-direct pricing, a wide selection of premium glazed tiles, strict quality control, expert product guidance, reliable nationwide delivery, and customized solutions for residential, commercial, and bulk projects.

The best supplier depends on your project requirements, product quality, service, and delivery capability. Morbi Tile Hub is a trusted factory-direct supplier offering a broad range of glazed tiles, competitive pricing, consistent quality, and pan-India supply for homeowners, builders, architects, and dealers.