Get answers to common questions about brick look tiles
Porcelain or vitrified brick look tiles with water absorption below 0.5% are the correct specification for Indian exterior walls. Ceramic brick look tiles are not suitable for exterior use they absorb moisture and degrade during monsoon exposure.
Ex-factory Morbi prices for brick look tiles typically range from ₹20–₹30 per sq.ft for budget segments and ₹30–₹70 per sq.ft for mid to premium grade. Retail prices are 40–80% higher than Morbi factory rates due to logistics and dealer margins.
Satin and semi-matte brick look tiles are significantly easier to maintain than heavily distressed or deeply textured finishes. For kitchens and high-traffic walls, satin-finish vitrified brick look tiles give the brick appearance without the cleaning difficulty of deep texture grooves.
Brick look tiles provide a protective exterior layer and the textured surface can marginally reduce direct heat absorption, but overall thermal performance depends more on wall construction and insulation. Porcelain and vitrified tiles with lower water absorption are the better choice for exterior use in Indian climatic conditions.
White salt deposits collect in texture grooves when moisture moves through the substrate. For vitrified brick tiles, clean using a mild neutral detergent and a stiff brush. For natural clay cladding, apply a matte water-based sealant every 2–3 years after cleaning to prevent recurrence. Avoid acid cleaners on glazed surfaces.