Parking Tiles for Driveways & Car Parking Areas in India

Antibacterial porcelain or full-body vitrified tiles with R11 slip resistance are the standard specification for most hospital zones. For operation theatres and ICUs, seamless vinyl or epoxy floor systems are preferred because they significantly minimise bacterial retention risk by eliminating grout lines.

Basic ceramic hospital tiles start from around Rs 60 per sq.ft at retail and Rs 27 per sq.ft from Morbi factories. Anti-bacterial vitrified tiles run from Rs 64–280 retail and Rs 35–60 factory. Porcelain hospital-grade tiles range from Rs 120–395 retail and Rs 50–80 factory. Freight and GST are additional.

NABH standards require flooring that is non-porous, non-slip, chemical-resistant, and washable. Floors must support infection control, which means coved wall-floor junctions, minimal grout joints, and surfaces that can withstand industrial disinfectants repeatedly without surface degradation.

It is not legally mandatory in all cases, but it is the only grout material that meets the hygiene requirements of clinical environments consistently. Standard cement grout absorbs moisture, stains under disinfectants, and creates a bacterial retention risk. For any zone from the OPD inward, Epoxy Grout is the correct specification.

Full-body vitrified tiles are the standard choice for wards and corridors because of their durability, load-bearing capability, and long service life. Vinyl is preferred for OTs and ICUs where a seamless, joint-free surface is required and acoustic comfort is a priority.

Micro-textured porcelain tiles with an R12 or R13 slip resistance rating are the standard specification for ramps and areas with consistent moisture exposure. Deep texture should be avoided as it compromises cleanability.