Floor Tiles for Indian Homes – 2026 Prices, Types & Expert Guide

The polished glaze on PGVT can develop micro-scratches in high-traffic zones particularly near entrances leading to gradual dulling over time. Nano-coated PGVT tiles are more resistant and can maintain gloss significantly longer than standard polished tiles when properly maintained. Double-charged vitrified tiles are less prone to this because the polished surface is the tile body itself, not a separate glaze layer.

No. Polished finish tiles have a low wet coefficient of friction, making them a genuine slip hazard when wet. Dry COF is typically above 0.40, but wet surfaces shift that significantly. Values vary by manufacturer and testing method. Matte, anti-skid, or textured finishes are the correct specification for bathroom floors. For bathroom walls in dry zones, a polished finish is acceptable.

Check that every box purchased carries the same batch number before installation begins. Tiles from different production batches even from the same manufacturer and design can show visible colour or tone differences on a polished floor.

600×1200 mm is currently the most demanded format for residential flooring across India. It creates visual continuity with fewer visible grout joints and suits the proportions of standard apartment living rooms and halls.

A hollow sound when tapping means the tile is not fully bonded to the subfloor. This happens when tiles are installed using spot-fix mortar instead of full-bed coverage, leaving air gaps beneath. This is an installation problem, not a tile defect. Large-format vitrified tiles require full-bed mortar or appropriate tile adhesive to eliminate hollow spots.

Glossy tiles carry a glaze layer applied during manufacturing the gloss is a property of that coating. Polished finish tiles get their shine from mechanical grinding and buffing after manufacturing, either on the glaze surface (PGVT) or directly on the tile body (DCVT). Polished tiles are generally denser and harder-wearing than standard glossy tiles.

Verify batch number consistency across all boxes. Check each tile for bow and warpage. Confirm the subfloor is flat and level within acceptable tolerance. Ensure the installation team will use full-bed mortar or tile adhesive not spot-fix. Use tile levelling clips to control lippage on 600×1200 mm and larger formats. Use epoxy grout for joints in premium polished installations to avoid staining and discolouration.

In dry kitchen zones away from the cooking range, sink, and water use areas polished floor tiles are manageable. In cooking and washing zones, the combination of water, oil splatter, and a polished surface creates both a slip risk and a maintenance challenge. A matte or lightly textured tile is more practical for those zones.

Calculate your floor area and add 8–10% for cuts, breakage, and future replacement. For 1000 sq ft with 8% wastage, purchase for approximately 1,080 sq ft. For 600×1200 mm tiles (approximately 7.75 sq ft per box with 2 tiles), you will need around 140 boxes. Confirm box coverage with your godown before placing a bulk dispatch order.

Epoxy grout is the recommended choice. It is stain-resistant, non-porous, and does not discolour over time the way cement-based grout can. For premium floors, cement grout in joints picks up stains easily and creates a maintenance problem within the first year.